GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar 🔼

/ movies / By

How to Flash GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on Your Galaxy Tab 2 10.1

If you are a Galaxy Tab 2 10.1 user who likes to experiment with custom ROMs and mods, you might want to install a custom recovery on your device. A custom recovery is a software that allows you to perform various tasks on your device, such as backup and restore, wipe data, install zip files, and more.

One of the most popular custom recoveries is ClockworkMod Recovery (CWM), which has a touch-enabled version that makes it easier to navigate and use. The latest version of CWM Touch Recovery is 6.0.1.2, which brings improvements such as faster backup and restore, smaller incremental backups, and more.

In this article, we will show you how to flash GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on your Galaxy Tab 2 10.1 using Odin, a tool that is used to flash firmware and files on Samsung devices.

Disclaimer

Flashing a custom recovery on your device may void your warranty and may cause damage or brick your device if done incorrectly. We are not responsible for any harm that may occur to your device by following this guide. Proceed at your own risk.

Requirements

Steps to Flash GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on Your Galaxy Tab 2 10.1

  1. Turn off your device and boot it into download mode by pressing and holding the Power and Volume Down buttons together until you see a yellow triangle on the screen. Then press Volume Up to enter download mode.
  2. Launch Odin on your PC by double-clicking the Odin3 v1.85.exe file that you extracted in step 7.
  3. Connect your device to your PC using the USB cable. You should see a message saying “Added!” in Odin’s message box at the bottom left.
  4. In Odin, click on the PDA button and select the GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar file that you downloaded in step 8.
  5. Make sure that only Auto Reboot and F. Reset Time options are checked in Odin and nothing else.
  6. Click on the Start button in Odin to begin the flashing process.
  7. Wait for the flashing process to finish. You should see a message saying “PASS!” in Odin’s message box at the top left and your device should reboot automatically.
  8. Disconnect your device from your PC and turn it off again.
  9. To boot into C

    How to Use GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on Your Galaxy Tab 2 10.1

    After flashing GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on your Galaxy Tab 2 10.1, you can use it to perform various tasks on your device, such as backup and restore, wipe data, install zip files, and more. Here are some of the main features and functions of CWM Touch Recovery:

    • Backup and Restore: You can backup your entire system, data, and apps to your external SD card or internal storage and restore them later if needed. You can also create and restore incremental backups, which only backup the changes since the last backup.
    • Wipe Data: You can wipe your data, cache, dalvik cache, and system partitions to prepare your device for a new ROM or mod installation or to fix any issues.
    • Install Zip: You can install zip files from your external SD card or internal storage that contain custom ROMs, mods, kernels, themes, etc. You can also install multiple zip files in a batch mode.
    • Advanced: You can access some advanced options such as fix permissions, partition SD card, mount and unmount partitions, format partitions, etc.
    • Reboot: You can reboot your device to system, recovery, or bootloader mode.

    To use CWM Touch Recovery on your device, you need to boot into recovery mode by pressing and holding the Power and Volume Up buttons together until you see the CWM Touch Recovery logo on the screen. Then you can use the touch screen to navigate and select the options you want.

    How to Update GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on Your Galaxy Tab 2 10.1

    If you want to update GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on your Galaxy Tab 2 10.1 to a newer version or a different custom recovery, you can do so by following the same steps as above for flashing the recovery file using Odin.

    However, before you flash a new recovery file, you need to make sure that it is compatible with your device model and firmware version. You also need to backup your current recovery file in case something goes wrong or you want to revert back to it later.

    To backup your current recovery file, you can use an app called ROM Manager, which is available on the Google Play Store for free. ROM Manager allows you to manage your ROMs and recoveries easily and conveniently.

    To backup your current recovery file using ROM Manager, follow these steps:

    1. Download and install ROM Manager on your device from here: https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en&gl=US
    2. Launch ROM Manager and grant it root access if prompted.
    3. Select Backup Current Recovery from the main menu.
    4. Select a location to save the backup file on your external SD card or internal storage.
    5. Wait for the backup process to complete.

    To restore your previous recovery file using ROM Manager, follow these steps:

    1. Launch ROM Manager and grant it root access if prompted.
    2. Select Flash ClockworkMod Recovery from the main menu.
    3. Select Other from the list of devices.
    4. Select Choose a File from SD Card from the pop-up menu.
    5. Browse and select the backup file that you saved earlier.
    6. Wait for the flashing process to complete.

    Troubleshooting

    If you encounter any problems or errors while flashing or using GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on your Galaxy Tab 2 10.1, here are some possible solutions:

    • If Odin does not recognize your device or shows a message saying “FAIL!”, make sure that you have installed the correct drivers on your PC and that you have enabled USB debugging on your device.
    • If Odin gets stuck at “SetupConnection” or “NAND Write Start”, try changing the USB port or cable that you are using or rebooting your PC and device.
    • If Odin shows a message saying “Complete(Write) operation failed”, try using a different version of Odin or re-downloading the recovery file.
    • If your device does not boot into CWM Touch Recovery after flashing it, try booting into download mode again and re-flashing it using Odin.
    • If CWM Touch Recovery does not respond to touch inputs or shows inverted colors or distorted graphics, try using the volume buttons and power button instead of touch screen or re-flashing it using Odin.
    • If CWM Touch Recovery does not backup or restore properly or shows errors such as “MD5 mismatch” or “Can’t mount”, try formatting your external SD card or internal storage using CWM Touch Recovery or re-flashing it using Odin.

    How to Use GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on Your Galaxy Tab 2 10.1

    After flashing GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on your Galaxy Tab 2 10.1, you can use it to perform various tasks on your device, such as backup and restore, wipe data, install zip files, and more. Here are some of the main features and functions of CWM Touch Recovery:

    • Backup and Restore: You can backup your entire system, data, and apps to your external SD card or internal storage and restore them later if needed. You can also create and restore incremental backups, which only backup the changes since the last backup.
    • Wipe Data: You can wipe your data, cache, dalvik cache, and system partitions to prepare your device for a new ROM or mod installation or to fix any issues.
    • Install Zip: You can install zip files from your external SD card or internal storage that contain custom ROMs, mods, kernels, themes, etc. You can also install multiple zip files in a batch mode.
    • Advanced: You can access some advanced options such as fix permissions, partition SD card, mount and unmount partitions, format partitions, etc.
    • Reboot: You can reboot your device to system, recovery, or bootloader mode.

    To use CWM Touch Recovery on your device, you need to boot into recovery mode by pressing and holding the Power and Volume Up buttons together until you see the CWM Touch Recovery logo on the screen. Then you can use the touch screen to navigate and select the options you want.

    How to Update GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on Your Galaxy Tab 2 10.1

    If you want to update GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on your Galaxy Tab 2 10.1 to a newer version or a different custom recovery, you can do so by following the same steps as above for flashing the recovery file using Odin.

    However, before you flash a new recovery file, you need to make sure that it is compatible with your device model and firmware version. You also need to backup your current recovery file in case something goes wrong or you want to revert back to it later.

    To backup your current recovery file, you can use an app called ROM Manager, which is available on the Google Play Store for free. ROM Manager allows you to manage your ROMs and recoveries easily and conveniently.

    To backup your current recovery file using ROM Manager, follow these steps:

    1. Download and install ROM Manager on your device from here: https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en&gl=US
    2. Launch ROM Manager and grant it root access if prompted.
    3. Select Backup Current Recovery from the main menu.
    4. Select a location to save the backup file on your external SD card or internal storage.
    5. Wait for the backup process to complete.

    To restore your previous recovery file using ROM Manager, follow these steps:

    1. Launch ROM Manager and grant it root access if prompted.
    2. Select Flash ClockworkMod Recovery from the main menu.
    3. Select Other from the list of devices.
    4. Select Choose a File from SD Card from the pop-up menu.
    5. Browse and select the backup file that you saved earlier.
    6. Wait for the flashing process to complete.

    Troubleshooting

    If you encounter any problems or errors while flashing or using GT-p5100 ClockworkMod-Touch Recovery 6.0.1.2.tar on your Galaxy Tab 2 10.1, here are some possible solutions: